After 24 hrs of curing time of the POR15, I've install the windshield. I've started by applying sealer in the groove and put the gasket in place. I put petroleum jelly around the windshield to slide it easily into the gasket.
Once in place, I sealed the bottom. Once cured I added the holding piece under it starting by the center and then doing each side separately to keep the windshield in place.
The summer is coming, so the duct has to be fixed.
I sawed the slop shut then apply duct tape.
The hood is back on.
Once in place, I sealed the bottom. Once cured I added the holding piece under it starting by the center and then doing each side separately to keep the windshield in place.
The summer is coming, so the duct has to be fixed.
I sawed the slop shut then apply duct tape.
The hood is back on.
No comments:
Post a Comment