This is the reference for the HP pump belts.
Aligning the steering rack with a special tool.
The hydraulic fluid filter was damaged; this could be why the pump had a strange noise.
Ready to go, with new O rings. I've cup the olive at the connector; much easier to put a new hose and avoid breakage.
The fluid is in.
Checked the thermostat; looks good and free moving nicely.
Installed the weights on the chassis; the small on goes on the right side.
I always put some grease under the battery tray to protect the metal.
Almost ready to go. I have to deal with all the damaged wires today :o(
Aligning the steering rack with a special tool.
The hydraulic fluid filter was damaged; this could be why the pump had a strange noise.
Ready to go, with new O rings. I've cup the olive at the connector; much easier to put a new hose and avoid breakage.
The fluid is in.
Checked the thermostat; looks good and free moving nicely.
Installed the weights on the chassis; the small on goes on the right side.
I always put some grease under the battery tray to protect the metal.
Almost ready to go. I have to deal with all the damaged wires today :o(
No comments:
Post a Comment