Wednesday, March 17, 2010

Finishing the electricals...

Leak alert! Changed the hose going from the water pump to the cab. Cheap replacement hose ref # 19039.

Oiled and installed the air filter.

Cosing down the dash. I took the original part holding the ignition switch and cut off the back to use it as a washer.



A garden hose rubber washer will do nicely to prevent the switch to turn while starting.


Done!


The rear light are working, but...


... one brake light is rusted and the threads are damaged. Bad new, it quite a job to remove it and replace it with the spare one from the other car.


The dash is finished.



I used the speedo cable hole to get the new wires to engine compartment. I put a plastic wire protector and a special body putty to keep the hot air and engine noise going to the passenger compartment.



No comments:

Post a Comment